Setup Oxhoo TP85 Printer
Step-by-Step Guide to Download and Install Drivers for Oxhoo TP85 Printer
Open your browser and go to Oxhoo Support Downloads Page.
In the search bar, type "TP85" and click Filter to list all relevant downloads for the TP85 model.
From the list, you need to download the following files:
TP85/90 - Driver:
- Description: Windows driver.
- Click "Download" next to this item to get the printer driver.
TP85/90 - Network Utility:
- Description: Network utility for TP85 & TP90.
- If you are using the printer on a network, download this utility.
TP85/90 - Tool:
- Description: Windows printer setting tool.
- This tool is used to configure the printer settings.
You may also consider downloading:
- TP85 - WiFi: If you need to set up Wi-Fi for the printer.
USB Connection:
- Plug one end of the USB cable into the printer and the other end into your computer.
- Ensure the printer is powered on and wait for Windows to detect it automatically.
Ethernet Connection:
- Connect one end of the Ethernet cable to the printer and the other end to your network router or switch.
- Ensure the printer is powered on and properly connected to the network. You will need the IP address obtained from the self-test (Step 3) for further configuration.
Ensure the printer is powered on and loaded with paper.
Press and hold the Feed button while turning on the printer.
Release the Feed button once the printer starts printing the self-test page.
The printed self-test page will display important information, including the printer's current IP address.
If it does not, double check all your connections and restart the router and printers.
TP85/90 - Driver Open folder
Double-click on the setup file ( setup.exe) to begin the installation.
Follow the on-screen instructions to install the printer driver.
TP85/90 - Tool:
- Install the printer setting tool to manage configurations like paper size, port settings, and others.
Network Utility:
- Run the Network Utility setup if you are configuring the printer over a network connection.
By following these steps, you should have all the necessary software installed to set up your Oxhoo TP85 printer on Windows and allow you to use it with the POS.
Browser
Step 1: Visit the Downloads Page
Open your browser and go to Oxhoo Support Downloads Page.
In the search bar, type "TP85" and click Filter to list all relevant downloads for the TP85 model.
From the list, you need to download the following files:
TP85/90 - Driver:
- Description: Windows driver.
- Click "Download" next to this item to get the printer driver.
TP85/90 - Network Utility:
- Description: Network utility for TP85 & TP90.
- If you are using the printer on a network, download this utility.
TP85/90 - Tool:
- Description: Windows printer setting tool.
- This tool is used to configure the printer settings.
You may also consider downloading:
- TP85 - WiFi: If you need to set up Wi-Fi for the printer.
Printer
Step 2: Connect the Printer via Ethernet or USB
USB Connection:
- Plug one end of the USB cable into the printer and the other end into your computer.
- Ensure the printer is powered on and wait for Windows to detect it automatically.
Ethernet Connection:
- Connect one end of the Ethernet cable to the printer and the other end to your network router or switch.
- Ensure the printer is powered on and properly connected to the network. You will need the IP address obtained from the self-test (Step 3) for further configuration.
Step 3: Perform a Self-Test to Get the Printer's IP Address
Ensure the printer is powered on and loaded with paper.
Press and hold the Feed button while turning on the printer.
Release the Feed button once the printer starts printing the self-test page.
The printed self-test page will display important information, including the printer's current IP address.
If it does not, double check all your connections and restart the router and printers.
Terminal
Step 4: Install the Driver and Tool
TP85/90 - Driver Open folder
Double-click on the setup file ( setup.exe) to begin the installation.
Follow the on-screen instructions to install the printer driver.
TP85/90 - Tool:
- Install the printer setting tool to manage configurations like paper size, port settings, and others.
Step 5: Install the Network Utility (If Needed)
Network Utility:
- Run the Network Utility setup if you are configuring the printer over a network connection.
By following these steps, you should have all the necessary software installed to set up your Oxhoo TP85 printer on Windows and allow you to use it with the POS.
Updated on: 20/11/2024
Thank you!